Small Fragment

General Advantages of the System:

  • Minimization of irritations of ligaments and soft tissue due to flat plate and screw design
  • Screw heads countersunk to a large extent
  • High angular variability of up to 70° with full angular stability
  • High flexibility of treatment due to sieve design of respective plates
  • Angular stability in the shaft area: high security in case of bone instability
  • Systemmehrwert, d. h.: Kompatibilität der Schrauben und Instrumentarien mit vielen, weiteren Platten der HS3.0 Reihe 
  • Dreipunkt-Abstützung (Umwandlung von Biegespannungen in Zug- & Druckspannungen) möglich

For further information our Team is at your disposal at any time
 

Download Documents

Download Videos
 

Mini Fragment System

On the following pages we present our mini fragment products. Please note that the product portfolio presented here can only be an excerpt from the complete catalogue.

General Advantages of the System:

  • Screw heads countersunk to a large extent
  • Kraftschlüssige semi-winkelstabile Verbindung
  • Angular variability of up to 20°
  • Tightening and untightening the connection several times is possible
  • Screws and plates are compatible between HS1.5 and HS2.0 System

For further information our Team is at your disposal at any time.

Download Documents

Intramedullary Nailing - HCP-Pin

Fractures of the collarbone are one of the most common injuries of the upper extremity.

To this day most collarbone fractures are treated conservatively.

Together with the conservative treatment exist the disadvantages of a hardly controllable pain symptomatology and uncontrollable fragment dislocations, which often lead to bothersome bulge-like formation or shortening of the shoulder girdle in secondary.

Die Plattenosteosynthese hat oft kosmetisch störende Narbenkeloide zur Folge. 

This factor explains the upward trend to intra-medullary osteosynthesis of the collarbone.

General Advantages of the System:

  • Minimal-invasive implantation as well as removal of implant
  • Available in dynamic (HCPd) and static (HCPs) design
  • Elastic material properties
  • Tip-design with self-tapping thread and smooth self-guiding nose
  • Special thread design for easier insertion and less pin migration
  • Spiral drill at rear pin tip
  • Treatment of segment or comminuted fractures with the HCPss

For further information our  Team is at your disposal at any time.


Download Documents

Elastic Stable Intramedullary Nailing

The HSN-esin technology is based on the worldwide known surgical technique
of Elastic - Stable - Intramedullary - Nailing - short ESIN.

Intramedullary nailing means that one or more nails are intramedullarily implanted in long bones to support the fracture from inside.

Die HSN-esin technology may be applied for the following group of persons:

Children and Youngsters

  • Long bones: diaphyseal and certain epi- and metaphyseal fractures
  • Fractures of the clavicle (please also not note the alternative treatment method for the collarbone on www.hcp-pin.com)
  • Treatment of tumors
  • Osteotomy (relative)
  • Use for revision surgeries

Adults

  • Certain diaphyseal fractures of small and mini fragments (hand, foot, clavicle)


Especially for long bone fractures of children the ESIN technology is used in addition to conservative treatment (such as a cast), as to a large extent bone growth is not influenced in this case.

General Advantages of the System:

  • Minimal-invasive implantation as well as removal of implant
  • Special tip design for a gentle insertion
  • Flattened end for determination of position during surgery
  • Elastic material properties
  • New, angle stable closure cap called HSN-plug for axial support
  • Insert and aiming device for minimal-invasive insertion of the HSN-plug

For further information our    Team   is at your disposal at any time.


Download Documents

Small Fragment System Upper Arm DFD

  • Minimally invasive surgical technique
  • Stable conditions at the fracture zone lead to a pain-free situation, the dynamic properties accelerate the healing process
  • Insertion of the plate system away from the fracture
  • Extrem flat overall contruction
  • Low risk of perforation of the humeral head by the head screws
  • Extremely high tipping over stability by 3-fold angle stable screw placements at the shaft
  • Highest stability by three diverging head screws

For further information our  Team  is at your disposal at any time

Cannulated Screws

With our competely new and innovative cannulated screws, we offer a real alternative to conventional cannulated screws. A variety of technical solutions, make our hole screws so unique.

General Advantages of the System:

  • Self-tapping, self-drilling and self-reversing
  • Excellent force transmission thanks to the ForceDRIVE screw head with "Stick-Fit" technology
  • Small, minimally protruding screw head

For further information our Team is at your disposal at any time.

Download Documents